設備名稱 ：數控立式車削中心 Neoα-10EXⅡ
設備型號 ：Neoα-10EXⅡ, 數控系統 ：FANUC 0i-TF
ITEM | PARTS | SPECIFICATION | UNIT | Q'TY |
貨物 The Goods | 數控立式車削中心 | Neoα-10EXⅡ | Set | 1 |
貨物包括機器，數控單元以及標準附件和選配附件。 The Goods consists of the Machine, NC unit, and standard and optional accessories. | ||||
標準附件 Standard | NC控制器 NC unit | FANUC 0i-TF | Set | 1 |
刀座 Tool holder | ANH1-200-32 | Set | 1 | |
CHIP COVEYER 排屑機 | O-M Standard O-M標準 | Set | 1 | |
24 Tool ATC 24把刀ATC | O-M Standard O-M標準 | Set | 1 | |
X軸光柵尺 X-axis scale feedback | 海德漢 Heidenhain | Set | 1 | |
Coolant system 切削液裝置 | O-M Standard O-M標準 | Set | 1 | |
選配附件 Optional Accessories | Tool Holder 刀座 | O-M Standard O-M標準 | Set | |
Z軸光柵尺 Z-axis scale feedback | 海德漢 Heidenhain | Set | 1 | |
自動對刀儀 Automatic tool chip measuring offset system | O-M Standard O-M標準 | Set | 1 | |
主軸中心出水冷卻 Spindle center through coolant | O-M標準 O-M Standard | Set | 1 | |
在線測量 Automatic work measuring compensator | O-M標準 O-M Standard | Set | 1 | |
工作臺直徑 | Table diameter | mm | 1,100 |
最大切削直徑 | Maximum swing | mm | 1,250 |
最大回轉直徑 | Maximum turning diameter | mm | 1,400 |
最大加工工件高度 | Maximum turning height | mm | 800 |
滑枕到工作臺最大距離 | Maximum distance between ram end face and table top | mm | 990 |
最大工件重量 | Maximum table load | kg | 3,000 |
最大切削力 | Maximum cutting force | N | 25,000 |
最大扭矩 | Maximum torque | N.m | 13,000 |
滑枕頭垂直行程 | Vertical travel of ram | mm | 800 |
工作臺中心往右行程 | Maximum distance of the tool post travel along the X-axis from the table center to the right | mm | 1,135 |
工作臺中心往左行程 | Maximum distance of the tool post travel along the X-axis from the table center to the left | mm | 475 |
滑枕切面尺寸 | Ram cross-sectional dimensions | mm | Square 180×180 |
滑枕可能通過最小內徑 | Minimum passage diameter for the ram | mm | 270 |
可安裝刀具尺寸 | Acceptable cutting tool shank size | mm | 32×32 |
最大刀具凸出：車削內徑和外徑 | Max. tool protrusion for I.D. and O.D. turning | mm | 175 |
刀庫容量 | Number of tools storable in the ATC | piece | 24 |
刀具最大長度 | Max length of tool holder (from the tool nose to the tool shank gauge line*) | mm | 410 |
車削刀具最大重量 | Max weight of turning tool holder | kg/piece | 50 |
銑削刀具最大重量 | Max weight of milling tool holder | kg/piece | 25 |
X軸快速進給 | Tool post rapid travel (X-axis) | mm/min | 15,000 |
Z軸快速進給 | Tool head rapid travel (Z-axis) | mm/min | 12,000 |
每轉進給量（無級調速） | Tool head feed (continuously variable) | mm/rev | 0.01~500 |
工作臺轉速（兩極） | Table speed | min-1 | 2.00~420 |
銑削主軸轉速 | Milling spindle speed | min-1 | 25~2500 |
銑削主軸電機 | Milling spindle motor （30min./continuous)(AC) | kW | 18.5/15 |
銑削主軸最大扭矩 | Milling spindle maximum torque | N.m | 330 |
主軸電機30分鐘/連續 | Main motor (30min./continuous) (AC) | kW | 37/30 |
C 軸分度速度 | C axis index speed | min-1 | 3 |
C軸最小分度單位 | C axis index min. degree | deg | 0.001 |
C軸進給量范圍 | C axis feed rate | deg/min | 0～800 |
X&Z軸驅動電機
| Motor for tool post feed (AC servo) | kW | FANUC AC servo motor, one each for X-axis 3.0 & Z-axis 4.5 |
輔助電機 | Total capacity of auxiliary motors | kW | 3.0 |
機床總體高度 | Maximum overall height | mm | 4,020 |
占地面積 | Floor space (width × depth) | mm | 3,975×3,955 |
機床重量 | Mass of machine | kg | 13,000 |
1 | 主機及標準附件 | Standard Accessories | Quantity
|
1.1 | 工作臺直徑φ1,100mm，手動4爪 | Table: Φ1,100mm 4-jaw manual independent chuck table | 1 set |
1.2 | 切屑護罩 | Chip cover | 1 set |
1.3 | 標準刀柄一把（ANH1-200-32） | One piece of standard tool holder (ANH1-200-32) | 1 set |
1.4 | 拆刀扳手 | Assembly/disassembly tools | 1 set |
1.5 | 基礎安裝用零件 | Foundation bolts, levelling blocks and base plates | 1 set |
1.6 | 導軌潤滑油自動供油裝置 | Automatic forced feed lubrication unit for slide ways | 1 set |
1.7 | 控制系統 | FANUC series 0i-TF CNC unit | 1 set |
1.8 | 10.4英寸彩色顯示器和手動操作面板
| Operation panel with MDI and 10.4 inch color LCD display | 1 set |
1.9 | 中文顯示 | Chinese language display | 1 1 set |
1.10 | VAC37/30KW主軸電機 | VAC37/30KW main motor | 1 set |
1.11 | 潤滑油冷卻系統 | Lubrication oil cooling system | 1 set |
1.12 | 橫梁防護罩 | Telescopic cover on cross rail | 1 set |
1.13 | 冷卻系統 | Coolant system | 1 set |
1.14 | 三色指示燈 | 3-color signal light | 1 set |
1.15 | X軸光柵尺 | X-axis scale feedback | 1 set |
1.16 | 24把刀ATC | 24-tool ATC | 1 set |
2 | 選配附件 | Optional Accessories
| |
2.1 | 刀座 | Tool holder | sets |
2.2 | Z軸光柵尺 | Z-axis scale feedback | 1 set |
2.3 | 主軸中心出水冷卻 | Spindle center through coolant | 1 set |
2.4 | 操作面板USB 1個 | One piece of USB port on operation panel | 1 set
|
2.5 | 自動對刀儀 | Automatic tool chip measuring offset system | 1 set |
2.6 | 在線測量 | Automatic work measuring compensator | 1 set |
